CS350 Potentiostat/Galvanostat with Eis/Fra/Zra

CS350 Potentiostat /Galvanostat (electrochemical workstation) contains afast digital function generator, high-speed data acquisition circuitry, apotentiostat and agalvanostat. With high performance in stability and accuracy with advanced hardware and well-functioned software, it is acomprehensive research platform for corrosion, batteries, electrochemical analysis, sensor, life science and environmental chemistry etc.APPLICATION
1) Corrosion mechanism of metals in water, concrete and soil, etc.
2) Li-ion battery, solar cell, fuel cell, supercapacitor, new materials, photoelectronic materials;
3) Electrochemical analysis and sensor;
4) Reaction mechanism of electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc.
5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection.HARDWARE
Dual-channel high-speed 16bit/high-accuracy 24bit AD converter;
Built-in frequency response analyzer(FRA), frequency range: 10μHz~1MHz;
Built in high-power Potentiostat/Galvanostat/Zero resistance ammeter(ZRA);
Voltage control range: ±10V; Compliance voltage: ±21V ;
Current control range: ±2A;
Potential resolution: 10μV; current resolution 1pATECHNICAL ADVANTAGES
1. Impedance (EIS)
CS350 potentiostat applies correlation integral algorithm and dual-channel over-sampling technique, and has strong anti-interference ability. It is suitable for EIS measurements of high-impedance system (>109Ω, such as coating, concrete etc.). It can also be used to obtain Mott-Schottky curve and differential capacitance curve. During test, the software can display real-time open circuit potential(OCP) without entering. EIS of AA6063 Al alloy in Ce3+ containing 3% NaCl solution Polarization curve of Ti-based amorphous alloy & stainless steel in 3%NaCl solution
2. Polarization curve
It can complete linear polarization curve and Tafel plot measurements. The user can set the anodic reversal current (passivation film breakdown current) of the cyclic polarization curve to determine material's pitting potential and protection potential and evaluate the its susceptibility to intergranular corrosion. The software employs non-linear fitting to analyze polarization curve, and can make fast evaluation of material's anti-corrosion ability and inhibitors.
3. Voltammetry
It can do the following electroanalysis methods: Linear Sweep Voltammetry(LSV), Cyclic Voltammetry(CV), Staircase Cyclic Voltammetry(SCV), Square wave voltammetry(SWV), Differential Pulse Voltammetry(DPV), Normal Pulse Voltammetry(NPV), AC voltammetry(ACV), Stripping voltammetry etc. It integrates calculation of peak area, peak current and standard curve analysis. LSV curve: mesoporous carbon material in 0.1M KOH CV curves of PPy supercapacitor in 0.5 mol/L H2SO4
4. Electrochemical NoiseWith high-resistance follower and zero-resistance ammeter, it measures the natural potential/current fluctuations in corrosion system. It can be used to study pitting corrosion, galvanic corrosion, crevice corrosion, and stress corrosion cracking etc. Through noise spectrum, we can evaluate the inducement, growth and death of metastable pitting and crack. based on calculation of noise resistance and pitting index, it can complete localized corrosion monitoring.
Electrochemical noise of low-carbon steel in 0.05mol/L Cl-+0.1mol/L NaHCO3
5. Full floating measurement
CS350 workstation uses full-floating working electrode. It can be used for autoclave electrochemical measurements, on-line corrosion monitoring of metallic components under the ground (rebar in concrete, etc.)
6. User-defined methods
CS350 workstation supports user-defined combination measurements. The user can set cyclic timing measurements of an electrochemical method or several methods.
We are able to provide API functions and development examples, which facilitates some users' requirements for secondary development and self-defined measurements.
SpecificationsSpecificationsSupport 2-, 3- or 4-electrode systemPotentialcontrolrange: ±10VCurrentcontrolrange: ±2APotentialcontrolaccuracy: 0.1%xfullrange±1mVCurrentcontrolaccuracy: 0.1%xfullrangePotentialresolution: 10μV(>100Hz),3μV(<10Hz)Currentsensitivity:1pARisetime: <1μS(<10mA),<10μS(<2A)Referenceelectrodeinputimpedance:1012Ω||20pFCurrentrange: 2nA~2A, 10 rangesCompliancevoltage: ±21VMaximumcurrentoutput: 2ACVandLSVscanrate: 0.001mV~10,000V/sCAandCCpulsewidth: 0.0001~65,000sCurrentincrementduringscan: 1mA@1A/msPotentialincrementduringscan: 0.076mV@1V/msSWVfrequency: 0.001~100kHzDPVandNPVpulsewidth: 0.0001~1000sADdataacquisition:16bit@1MHz,20bit@1kHzDAResolution:16bit,setuptime:1μsMinimumpotentialincrementinCV: 0.075mVIMPfrequency: 10μHz~1MHzLow-passfilters: Covering8-decadePotentialandcurrentrange: AutomaticPCandO/SrequirementInterface:USB2.0OperatingSystem:Windows2000/NT/XP/ win7/win8/win10Weight / MeasurementsNet weight: 6.5kg Gross weight: 10kgInstrument size: 36.5 x 30.5 x16cm; After package: 52.5 x 37.5x 22.5cmElectrochemicalImpedance Spectroscopy(EIS)SignalgeneratorFrequencyrange:10μHz~1MHzACamplitude:1mV~2500mVDCBias:-10~+10VOutputimpedance:50ΩWaveform: sinewave,triangularwaveandsquare waveWavedistortion:<1%Scanningmode: logarithmic/linear,increase/decreaseSignalanalyzerIntegraltime:minimum:10msorthelongesttimeofacycleMaximum:106cyclesor105sMeasurementdelay:0~105sDCoffsetcompensationPotentialautomaticcompensationrange:-10V~+10VCurrentcompensationrange:-1A~+1ABandwidth:8-decadefrequencyrange, automaticandmanualsetting
Software CS350
Stable polarization: Open Circuit Potential (OCP), Potentiostatic (I-T measurement), Galvanostatic, Potentiodynamic (Tafel plot), Galvanodynamic
Transient polarization: Multi-Potential Steps, Multi-Current Steps, Potential Stair-Step (VSTEP), Galvanic Stair-Step (ISTEP)
Chrono Methods:Chronopotentiometry (CP), Chronoamperometry (CA), Chronocoulometry (CC)
Voltammetry: Cyclic Voltammetry (CV), Linear Sweep Voltammetry (LSV), Staircase Voltammetry (SCV), Differential Pulse Voltammetry (DPV), Normal Pulse Voltammetry (NPV), Square wave voltammetry (SWV), ACvoltammetry (ACV), Differential Normal Pulse Voltammetry (DNPV), 2nd Harmonic A. C. Voltammetry (SHACV), Fourier Transform AC Voltammetry(FTACV)
Stripping Voltammetry: Potentiostatic stripping, Linear stripping, Staircase stripping, Square wave stripping, Differential Pulse Voltammetry Stripping, Normal Pulse Voltammetry Stripping, Differential Normal Pulse Voltammetry Stripping.
Amprometric: Differential Pulse Amperometry(DPA), Double Differential PulseAmperometry(DDPA),Triple Pulse Amperometry (TPA), Integrated Pulse Amperometric Detection (IPAD)
Impedance: EIS vs Frequency (IMP), EIS vs Time (IMPT), EIS vs Potential (IMPE)
Corrosion testing: Electrochemical Noise (EN), Zero Resistance Ammeter (ZRA), Electrochemical Potentiokinetic Reactivation(EPR)
Battery testing: Battery charge and discharge, Galvanostatic charge and discharge
Extensions: Data Logger, Electrochemical stripping/deposition, Bulk electrolysis with CoulometryModels' software comparisonTechniques / electrochemical methodsCS150CS300CS310CS350Open Circuit Potential (OCP)√√√√Potentiostatic (I-T curve)√√√√Galvanostatic√√√√Potentiodynamic(Tafel plot)√√√√Galvanodynamic√√√√Multi-Potential Steps√√√√Multi-Current Steps√√√√Potential Stair-Step (VSTEP)√√√√Galvanic Stair-Step (ISTEP)√√√√Chronopotentiometry (CP)√√√Chronoamperometry (CA)√√√Chronocoulometry (CC)√√√Cyclic Voltammetry (CV)√√√√Linear Sweep Voltammetry (LSV)√√√√Staircase Voltammetry (SCV) #√√Square wave voltammetry (SWV) #√√Differential Pulse Voltammetry (DPV)#√√Normal Pulse Voltammetry (NPV)#√√Differential Normal Pulse Voltammetry (DNPV)#√√ACvoltammetry (ACV) #√√2nd Harmonic A.C.Voltammetry (SHACV)√√Differential Pulse Amperometry (DPA)√Double Differential Pulse Amperometry (DDPA)√Triple Pulse Amperometry (TPA)√Integrated Pulse Amperometric Detection (IPAD)√EIS vs Frequency (IMP)√√EIS vs Time (IMPT)√√EIS vs Potential (IMPE)(Mott-Schottky)√√Electrochemical Potentiokinetic Reactivation(EPR)√√√√Electrochemical Noise(EN)√√√√Zero resistance Ammeter (ZRA)√√√√Battery charge and discharge√√√√Galvanostatic charge and discharge(GCD)√√√√Data Logger√√√√Electrochemical stripping/deposition√√√Bulk electrolysis with Coulometry (BE)√√√√
What did the customers say?
"I am writing this letter to recommend this service of M/S Wuhan Corrtest Instrument Corp., Ltd to you. Our group has been working with potentiostat system manufactured by Wuhan Corrtest Instrument Corp., Ltd and quite satisfied with the same. As and when required they provide online technical support. Though I have not purchased equipment consumables yet, but I believe they will supply it within a short notice as they have supplied the system to us within a short time. Moreover, free software system up-gradation adds more convenience using this system."
"The system has been installed and working fine. We appreciate the system and support service they provided to us. We have no hesitation in recommending them for purchase of any electrochemistry through them"
"Our company procured a potentiostat system (CS310) from M/S Wuhan Corrtest Instrument Co., Ltd. in June 2015.
We have been using the potentiostat system manufactured by Wuhan Corrtest Instrument Corp., Ltd. and are quite satisfied with the same. The system was easy to set up and the performance to date has been satisfactory.
The unit was delivered promptly and their representative, Ms Yushan Zhang, was very responsive in responding to product queries."
based on our experience using the system from Wuhan Corrtest Instrument Corp., Ltd. thus far was a positive one. "
-"The company offers high quality service. We can say that we have always been satisfied by their work.
I can confidently recommend Wuhan Corrtest Instrument Co., Ltd. as a good and reliable supplier, and experts in their field."